Hydro Jetting in New London

When Drain Cleaning Needs to Go Further

Not every drain issue responds to a standard snake. For New London properties facing recurring backups, heavily scaled pipe walls, or lines that haven't been serviced in years, hydro jetting provides a more comprehensive solution. High-pressure water cleans the pipe's interior from wall to wall, removing grease films, root fragments, mineral buildup, and compacted debris that a cable-style snake can't fully reach.

Before our team at Mom & Pop Plumbing applies any pressure to your line, we inspect it. Camera inspection verifies the condition of the pipe walls and detects any structural issues, such as a cracked section, an offset joint, or a severely deteriorated area, that would make jetting inadvisable until repairs are made. This step protects your pipes and keeps the cleaning process more effective.

Properties throughout the Jefferson neighborhood, Northwest New London, and the older multi-family housing near the waterfront are candidates for periodic hydro jetting, especially when pipes have been in use for decades, and the original clay or cast-iron material is still in place.

Get an estimate for hydro jetting in New London. Call (860) 772-0622 or schedule online.

Camera Inspection Before Any Pressure Enters the Line

The inspection is the step that makes every other step more effective.

Our technicians run a high-resolution camera through the drain or sewer line and review the footage in real time. 

What we are looking for:

• Pipe condition – Cracks, fractures, or seriously deteriorated sections change the plan. Jetting at full pressure against a compromised pipe wall risks converting a cleaning job into a repair job. When the camera shows damage, we address that first.
• Blockage type and location – Grease buildup, root intrusion, sediment accumulation, and physical debris each respond differently to water pressure. Knowing what is in the line and where it is concentrated allows our team to adjust nozzle selection and pressure settings before work begins.
• Access point suitability – Not all cleanout locations are equally accessible or safe to work from. The inspection confirms the best entry point for the jetting equipment and whether any preparation is needed before we begin.

Once the inspection is complete, our team explains what was found, answers any questions, and confirms the approach with you before proceeding.

The Jetting Process

Hydro jetting employs a specialized nozzle attached to a flexible hose connected to a high-pressure water system. The nozzle is designed to direct water forward to break up blockages and backward to flush dislodged material toward the access point for removal.

Our technicians work systematically along the line, adjusting pressure and nozzle type based on what the inspection shows. For lines with heavy grease buildup, multiple passes through the same section may be necessary to completely remove it from the pipe walls. For root intrusion, jetting cuts and flushes root material out of the line, although root growth often resumes if the pipe crack that allowed the roots in is not repaired.

Throughout the process, our team monitors progress and communicates with you if anything unexpected is found. You are not left waiting without updates.

Final Check After Cleaning

Once jetting is finished, we run the camera through the line again to verify the results.

This step:

• Verifies that the blockage has been fully cleared
• Confirms the pipe walls are clean and undamaged
• Documents the post-cleaning condition for your records
• Identifies any findings that warrant attention on a follow-up visit, such as a small crack discovered after debris was cleared

That final check is part of the job. Our team does not consider the work complete until we have verified the results.

Preventing Future Clogs: What You Can Do Between Service Visits

Hydro jetting restores the pipe's condition, but future buildup starts as soon as the line is used again. How fast it happens depends mainly on the habits of everyone using the plumbing system.

The most effective things property owners can do between service visits:

• For grease management – Cool fats and oils until they solidify before disposal. Scrape cooking grease into a container and throw it away in the trash. Even liquid oils coat the pipe wall with each use, adding to the slow buildup that jetting was called to address.
• For drain care – Install hair traps in shower and tub drains. Hair collects faster than most homeowners realize and can trap soap scum and other debris. Emptying a simple trap weekly significantly lengthens the time between drain cleanings.
• For older properties ­– Schedule a camera inspection regularly. Every two to three years is a good baseline for plumbing installed before 1970. Detecting a root entering a joint or early scale buildup costs much less than fixing a full blockage or pipe failure under a yard or foundation.

Our team works with homeowners and property managers to set maintenance schedules tailored to their specific plumbing needs. A multi-family building near Electric Boat with ten units used daily requires a different schedule than a single-family home in the Bates Woods area.

Inspection First, Results You Can Verify

Hydro jetting is one of the most thorough drain cleaning methods available, but the results depend on understanding the line before work begins. At Mom & Pop Plumbing, our inspect-jet-verify process provides you with a clean pipe, documented results, and honest guidance on what to watch for moving forward.

Contact us at (860) 772-0622 to book hydro jetting service in New London. Our licensed plumbers inspect the line first and give you a clear plan before any pressure enters the pipe.

Frequently Asked Questions About Hydro Jetting

The questions below cover the most common concerns property owners have about hydro jetting, pipe safety, and what to expect.

How Long Does Hydro Jetting Take?

For a standard residential drain or sewer line, the entire process, including inspection, jetting, and a final camera check, usually takes two to three hours. Multi-family properties or commercial lines with longer runs may require more time, and our team will provide an estimate before starting.

Will Hydro Jetting Fix a Root Intrusion Problem Permanently?

Jetting removes the root material currently in the pipe, but it does not seal the crack or joint gap through which the roots entered. If the entry point is not repaired, root growth will return over the next growing seasons. Our team will mark any entry points found during inspection, so you have the full picture.

Can Hydro Jetting Be Done on Any Pipe Material?

It is suitable for most residential pipe materials in good condition. We don’t use high-pressure jetting on pipes with significant structural damage. The inspection step is designed to identify such issues before applying any pressure.

Do You Offer Hydro Jetting for Commercial Properties?

Yes. We serve commercial properties throughout New London County and have the equipment necessary for larger-diameter commercial lines. Contact our team to discuss your property's specific needs.

Is Hydro Jetting Safe for Older Pipes?

Hydro jetting is generally safe for most residential pipes in good condition. However, if the camera reveals cracked or fragile pipe walls, we will recommend repairing them first to prevent further damage. That’s why inspection comes before jetting.